Loading Ramps - Bullock

All National Stockyard Systems loading ramps are fully galvanised and feature a patented concrete floor (except budget) with plenty of treads.

Timber floors are subject to rot, white ant attack and fire. Steel floors are prone to noise and rust. Concrete floors minimise or avoid all these issues.

Bullock 3.6m Adjustable Hight Ramp

The height is quickly adjustable by lifting the floor and sliding the chain, a child could adjust the height of this loading ramp 25 in one inch increments from box trailer height, ute body height to semi trailer height.

Pictured with height around 800mm for back of Ute. Ramp is easily adjustable from 450mm to 1300mm. The ramp is available as standard, adjustable, with walkway or any combination. (Note: all ramps now come with sleeves and spigots). This is probably our most popular ramp.

Ramps can go off the side (pictured), off the front of the race or load out yards.

The rail sizes of our Hunter Ramps are 75 x 40mm and 115 x 42mm on the Bullock Ramps. All fixed height ramps are supplied with a floating height 125 x 75 x 3.0mm heavy duty bumper board.

All NSS ramps have at least 3 sleeves and spigots. After the ramp is set in position a hole is dug under each sleeve, the spigots are dropped into the holes and the holes filled with concrete. This prevents trucks from shunting the ramps.

All cattle loading ramps are available as standard, adjustable, with walkway or any combination.

Bullock 4.2 Metre Ramp with Walkway & 1.0m front extension.
The access gate swings across to block the ramp.

Bullock 3.6 Metre Ramp with Walkway


Ramp height is level with modern stock carriers with air suspension.

Scroll to Top