Optional extras that are available on all our crushes
Extra body gates can be ordered with your crush
Nearside and offside operation available
The floor of NSS crushes is 3mm thick with 3mm treads all fully welded in. Weigh bar mount can be punched to suit Tru-Test weighing equipment, or supplied as unpunched to suit products from other weigh bar suppliers.
Floor is welded in and includes weigh bar mounts. Load Cell or H-Bar mounting brackets can be fitted to all National Stockyard Systems crushes.
Full Ratchet Chin Lifter. Note how we have lifted the ratchet mechanism for the ratchet chin lifter. This is to minimise injury to animal and operator.(Standard on the Top End range but can replace the standard chin lifter on any crush or headbail).
Weighing. Large weather proof EID antenna mounting board.
We also sell the full range of Tru-Test Weighing and Identification Solutions for Livestock Management.
Thus we are a one-stop shop.
3 stage baulk gate is heavy duty construction. Cattle will not go over, under or through the baulk gate.
3 stage baulk gate open.
Auto Baulk closed. Cleverly designed linkages allow both baulk gates to open and close by pushing or pulling one gate.
Auto Baulk open. By pushing or pulling the on side, the off side will be mirrored through clever linkages. There is no better baulk gate available.
Double acting louvre rails can be fitted to any crush. (Standard on a Top End Plus 200).
Australian Design Application No. 20414004
Louvre Gate the rails open and close with a simple rotation of the operating handle.
A baulk gate is essential when catching horned cattle.
The full range of Tru-Test Livestock Management Systems including scales readers and indicators, weigh platforms and drafters etc.
Ratchet chin holder is an optional extra.
Lonnie Stone, Bovine Scanning Services
“This crush makes our work so much easier and safer”
Louvre gates standard on Top End Plus 200. Available on all other crushes.